TCS TL1160 Differential Pressure Transducers

TCS TL1160 Differential Pressure Transducers

TCS TX1500 Transmitters for TS Series Platinum Sensors

TCS TX1500 Transmitters for TS Series Platinum Sensors

TCS TX1130 Temperature Transmitter with Setpoint and Override

50 to 85°F Span Transmitter - with 100 ohm Platinum RTD sensor, setpoint and override
US$90.47
Availability: In stock
SKU
TX1130
 

Description

The TX1130 is a wall mount temperature transmitter complete with setpoint and override function. The TX1130 provides a Normally Open momentary pushbutton switch output. The TX1130 also provides two 4 to 20 mA outputs. The first output is the sensed temperature, scaled 4 to 20 mA from 50 to 85°F. The second is a 4 to 20 mA signal representing the position of the setpoint knob, scaled 50 to 85°F. Power may be provided from any DC supply from 8 to 35 VDC.

Features:

• 4-20mA temperature output (range 50 to 85ºF)

• 4-20mA setpoint adjustment (range 50 to 85ºF)

• Momentary push button override

• Mounts over standard handy bo

SPECIFICATIONS:

General Accuracy: +/- 0.35°F

Built-in sensor: 100 W platinum RTD Zero and span

adjustment: Non-interacting Environmental

Operating temperature: 32 to 158°F (0 to 70°C)

Operating humidity: 0 to 100% RH, non-condensing

Storage temperature: 14 to 176°F (-10 to 80°C)

Electrical Supply voltage: 8 to 35 VDC

Input voltage effect: +/- 0.001 % of span/volt

Output: Two 2-wire 4 to 20 mA DC, momentary normally open push-button switch rated 10 mA @ 35 VDC or 24 VAC

Maximum over current: 25 mA Polarity

protection: Diode protected

Write Your Own Review
You're reviewing:TCS TX1130 Temperature Transmitter with Setpoint and Override
Your Rating