TCS PHO1000 Humidity Sensor

Description

Low Profile Delta Style Enclosure with Optional Display

Humidity Only or Temperature/Humidity Combo

2% and 3% RH Accuracies

Optional Communications Jack

User Adjustable Toggle Rate Between Temp & Humidity Display

Wide Selection of Temperature Sensing Elements

Full-range Temperature Compensation of RH Signal

Five Year Warranty

Features:

The Delta Style room units are available as Humidity Only sensors or as Combination temperature and humidity sensors. They feature an optional display with a user adjustable toggle rate between humidity and temperature and can display in either °C or °F. The unit is available with the entire line of BAPI temperature sensors. If a temperature transmitter and humidity transmitter are desired, then see the “X-Combo” Unit on pages B10-11 of this section.

Specifications

Power:

10 to 35 VDC (0 to 5 VDC or 4 to 20 mA Outputs)

15 to 40 VDC (0 to 10 VDC Output)

12 to 24 VAC (0 to 5 VDC Output)

15 to 28 VAC (0 to 10 VDC Output)

Note: If AC power is used, it must be shielded from the signal wiring

Power Consumption:

22 mA max. DC (0 to 5 VDC or 4 to 20 mA Outputs)

6 mA max DC (0 to 10 VDC Output)

0.53 VA max. AC (0 to 5 VDC Output)

0.14 VA max. AC (0 to10 VDC Output)

Sensing Elements:

Temperature - Thermistor or RTD (See “Sensors” section for specs.)

Humidity - Capacitive Type, ±2% or ±3%RH @ 25°C (77°F), 20 to 80%RH %RH Calibration Adjustment: ±5% POT

Wiring: 2 to 3 pair of 16 to 22 AWG*

Mounting: 2”x4” J-box or drywall mount - screws provided Environmental Operation Range: Temp: 32 to 122 o F (0 to 50 o C)

Humidity: 5 to 95%, non-condensing Material & Rating: ABS Plastic, UL94 HB

Agency: RoHS and CE